Product introduction of waterproof slurry
Bolong waterproof coating series is a high-efficiency waterproof material designed for different substrates. It is a cement-based waterproof coating modified by acrylic high polymer. This product uses dry powder and liquid additives. After mixing, a chemical reaction occurs to form a tough elastic waterproof layer. This layer has good adhesion to the base surface, can form a tight, firm and permanent bond with it, and can inhibit Mold growth and protection from salt contamination.
Two main features
It can be constructed on wet base surfaces, and the waterproof layer has high mechanical strength and good wear resistance.
The coating can prevent moisture and salt pollution and inhibit mold growth.
Concrete can still remain breathable. Since this product is cement-based, ceramic tiles, mosaics, etc. can be laid directly on the waterproof layer.
This product has two appearances: white and gray.
Three scopes of application
Used for indoor and outdoor cement concrete building structures, prefabricated concrete structures, cement plasters and brick walls and other base surfaces.
Underground parking lanes, underground tunnel water supply and drainage pipes, floor walls and floors.
This product is non-toxic and harmless and can be directly used in drinking water reservoirs, swimming pools, fish ponds, etc.
This product is also suitable for various waterproofing projects on the upstream or downstream surfaces.
Four construction requirements
The base layer must be clean, solid, flat, dry, ash-free and sand-free.
Pour the liquid into the prepared container in proportion, then add the powder into the liquid in proportion, and stir thoroughly until the liquid and powder are dissolved.
Use a roller gunite machine or brush to roll or spray the mixed slurry evenly onto the cement base surface. The coating should be applied all over and the coating thickness should be applied according to the design requirements.
The order of coating is to apply the first coat followed by about 100°C, then apply the third coat in the direction perpendicular to the °C angle after the coating is dry, and so on.
It is forbidden to step on it within hours after the construction is completed. After it is completely dry, other covering layers (such as plastering, ceramic tiles, mosaics, etc.) can be applied.
Five technical indicators execution standards
Serial number
Inspection items
Type
Type
Tensile strength
< br/>Elongation at break
Water impermeability
Water impermeability
Water impermeability
Drying time
Explicit drying time
Six Packaging, Storage and Transportation
Liquid materials must be stored in a cool place above ℃, and powder materials should be stored in a dry place. Pay attention to moisture, sun and rain protection. The shelf life of this product is one year.
The liquid of this product is packed in plastic barrels, and the powder is packed in plastic-lined bags.
This product is a set (㎏powder material㎏liquid material).
Seven reference dosage and proportion
When the thickness of the waterproof layer is Keep for one year.
Packaging specification (two components)
Type powder additive (large component) Powder additive (medium component) Powder additive (small component)
Type powder additive (large component) Component) Powder additive (medium component) Powder additive (small component)
K11 waterproof slurry